Subject to Legal Review in English, Spanish and French for Accuracy, Clarity and Consistency
Subject to Authentication of English, Spanish and French Versions
The product-specific rules of origin (PSR) Annex and its Appendix are subject to transposition and legal verification by the Parties. The only authentic PSR are those that are set out in the PSR Annex and Appendix that accompany the final, signed Agreement.
Appendix 1 to Annex 3-D:
Provisions related to the Product-Specific Rules of Origin for certain vehicles and parts of vehicles
1. For the purpose of satisfying the regional value content requirement of the product-specific rule of origin applicable to a good of subheading 8701.10 through 8701.30 or heading 87.02 through 87.05, a material listed in Table A used in the production of that good is originating if:
(a) it meets the applicable requirements for that material under the PSR Annex; or
(b) the production undertaken on that material in the territory of one or more of the Parties involves1 one or more of the operations listed in Table B.
2. For the purpose of satisfying the regional value content requirement of the product-specific rule of origin applicable to a good listed in Table C, a material used in the production of that good is originating if:
(a) it meets the applicable requirements for that material under the PSR Annex; or
(b) subject to paragraph 3, the production undertaken on that material in the territory of one or more of the Parties involves one or more of the operations listed in Table B.
3. The value of the materials that are originating under paragraph 2(b) shall be counted as originating content, provided that the value counted as originating content does not exceed the applicable threshold listed in Table C of the value (Build-Up / Build-Down) or cost (Net Cost) of the good.
Table A
HS Code
Description
7007.11
Toughened (tempered) safety gla**
7007.21
Laminated safety gla**
8707.10
Bodies (including cabs), for the motor vehicles of heading 87.03
8707.90
Bodies (including cabs), for the motor vehicles of heading 87.01, 87.02, 87.04 and 87.05
ex 8708.10
Bumpers (not including parts thereof)
ex 8708.29
Body stampings and door a**emblies (not including parts thereof)
ex 8708.50
Drive-axles with differential, whether or not provided with other transmission
1 For greater certainty, one or more of the listed operations must be involved in the production of a material listed in Table A. Performing a listed operation on one or more parts or subsystems that are subsequently used in the production of a material listed in Table A is not sufficient to confer origin on that material.
Subject to Legal Review in English, Spanish and French for Accuracy, Clarity and Consistency
Subject to Authentication of English, Spanish and French Versions
The product-specific rules of origin (PSR) Annex and its Appendix are subject to transposition and legal verification by the Parties. The only authentic PSR are those that are set out in the PSR Annex and Appendix that accompany the final, signed Agreement.
components, and non-driving axles (not including parts thereof)
Subject to Legal Review in English, Spanish and French for Accuracy, Clarity and Consistency
Subject to Authentication of English, Spanish and French Versions
The product-specific rules of origin (PSR) Annex and its Appendix are subject to transposition and legal verification by the Parties. The only authentic PSR are those that are set out in the PSR Annex and Appendix that accompany the final, signed Agreement.
Table B
Note 1: “Complex” means an operation that requires specialized sk**s and the use of machines, apparatus or tools that are especially produced or installed to carry out that operation, regardless of whether such machines, apparatus or tools were produced with the intention of carrying out that operation on a specific good.
Note 2: The operations referred to in Table B do not include the mere a**embly of non- originating components cla**ified as a good in accordance with Rule 2(a) of the General Rules for the Interpretation of the Harmonized System.
Table C
Complex a**embly
Complex welding
Die or other casting
Extrusion
Forging
Heat treating including gla** or metal tempering
Laminating
Machining
Metal forming
Moulding
Stamping including pressing
HS Code
Description
Threshold
8407.33
Spark-ignition reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87 :Of a cylinder capacity exceeding 250 cc but not exceeding 1,000 cc
10%
8407.34
Spark-ignition reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter 87 : Of a cylinder capacity exceeding 1,000 cc
10%
8408.20
Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) of a kind used for the propulsion of vehicles of Chapter 87
10%
8706.00
Cha**is fitted with engines, for the motor vehicles of headings 87.01 to 87.05
10%
8708.10
Bumpers and parts thereof
10%
8708.21
Safety seat belts
10%
8708.29
Other parts and accessories of bodies (including cabs)
5%
8708.30
Brakes and servo-brakes; parts thereof
10%
8708.40
Gear boxes and parts thereof
10%
8708.50
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
5%
8708.80
Suspension systems and parts thereof (including shock-absorbers)
10%
8708.94
Steering wheels, steering columns and steering boxes; parts thereof
10%
Subject to Legal Review in English, Spanish and French for Accuracy, Clarity and Consistency
Subject to Authentication of English, Spanish and French Versions
The product-specific rules of origin (PSR) Annex and its Appendix are subject to transposition and legal verification by the Parties. The only authentic PSR are those that are set out in the PSR Annex and Appendix that accompany the final, signed Agreement.
8708.95
Safety airbags with inflater system; parts thereof
5%
8708.99
Other parts and accessories
5%